Outdoor Series Wet System Fire Cabinets (Glass Lid 1”)

Outdoor Series Wet System Fire Cabinets (Glass Lid 1”)


Portfolio Description

Today, the most feared risk classes are earthquakes and fires. In fires, building strength, human evacuation flow and controlling the areas where the fire is dispersed are vital.

Fire doors should be used to control the fire or to keep it at a certain point until the fire is intervened. Fire doors are the doors that create barricades between the place and the safe areas in case of fire, are specially produced according to the types of fire and provide the safety of the employees and the building and are resistant to high temperatures. The most important passive fire prevention is the fire doors which are vital for the safety of life and property.

BODY: 1,50mm-2mm sheet thickness, DKP, galvanized or stainless steel, adjustable full frame and corner type half frame is produced in two different types.

WING, 0.8MM 1.2 mm sheet thickness DKP, galvanized or stainless steel, single wing and double wing options are produced.

PAINT: electrostatic powder coating.

WICK: Intumescent wick that closes gaps by expanding at 170 ° C.

ACCESSORIES: According to the project, panic bar, locked arm set, under the door automatic guillotine roving, hydraulic door closer, magnetic door holders.

More Information
  • The cabinet is 750x750x200 mm. in size.
  • Cabinet case 1.2 mm. Made of DKP sheet metal.
  • The cabinet door is made of black or white tempered glass.
  • RAL 9005- Black & RAL 9016 White electrostatic powder coated.
  • The hinges of the cabinet are 0.8 mm. Length is from hinges.
  • The hose inside the cabinet is TSE EN 694 certified. 20mt - 25mt - 30mt hose options are available.
  • There is a 1 ”three-position fog nozzle inside the cabinet.
  • Inside the cabinet there is a 2 ”(85 lik) fire valve with TSE 12259 Certificate and a 2-1” aluminum injection tail record with TSE 12258 certificate.
  • Cabinet drum 1.2mm. It is made of DKP sheet metal and is printed with strength increasing pattern.
  • The drum mounting bracket is double-sided.
  • The locks on the cabinet door are built-in plastic and can be opened with 3 fingers.
  • Cabinet locks width: 8 cm, length: 10 cm.
  • Centered holes in the 8 cm diameter were positioned at the four corners of the cabinet.
  • The water inlet core of the drum is made of plastic / yellow material.
  • Interconnecting hose 1 mt. 80 cm long larynx hose is attached at the connection part to prevent the hose from bending.
  • 8mm behind the case for cabinet mounting. There are 4 holes in diameter.