PLASTER-UNDER-PLASTER FIRE CABINET WITH SHEET DOOR TECHNICAL SPECIFICATIONS
- PLASTER-UNDER-PLASTER FIRE CABINET WITH SHEET DOOR TECHNICAL SPECIFICATIONSIt has TSE EN 671-1 Certificate.
- The cabinet is 750x750x200 mm. in size.
- Cabinet case 1.2 mm. Made of DKP sheet metal.
- Powder coated in red.
- The hinges of the cabinet are 0.8 mm. Length is from hinges.
- The hose inside the cabinet is TSE EN 694 certified and 20mt – 25mt and 30mt options are available.
- There is a 1 ”three-position fog nozzle inside the cabinet.
- Inside the cabinet there is a 2 ”(85 lik) fire valve with TSE 12259 Certificate and a 2-1” aluminum injection tail record with TSE 12258 certificate.
- Cabinet drum 1.2mm. It is made of DKP sheet metal and is printed with strength increasing pattern.
- The drum mounting bracket is double-sided.
- The locks on the cabinet door are built-in plastic and can be opened with 3 fingers.
- Cabinet locks width: 8 cm, length: 10 cm.
- Centered holes in the 8 cm diameter were positioned at the four corners of the cabinet.
- Kapak TSE EN 671-1 ”is printed on the cover.
- The water inlet core of the drum is made of plastic / yellow material.
- Interconnecting hose 1 mt. 80 cm long larynx hose is attached at the connection part to prevent the hose from bending.
- Drum suspension arm 4 mm. Made of lamina.
- 8mm behind the case for cabinet mounting. There are 4 holes in diameter.